Language Selection
Versione Italiana
English Version
Home
Company
Products
Accessories
Distributors
Articles
Jobs
Events
Contacts
Downloads
Pulsar
Overview
Specifications
Configurations
Accessories
Download
Pulsar
- Base Module - Technical specifications
Programmability
PROGRAMS:
Over 1000 user programs, each including 3 U/S, 2 DIATH, 2 I/A, 2 VIT modes
Equipment Control
USER INTERFACE:
Graphic User Interface, 12.1" LCD with touch screen
REMOTE CONTROL:
Cable wired, controls all functions
FOOT PEDAL:
Dual linear programmable footpedal controls all the equipment functions
Instrument Cart
I.V. POLE TYPE:
Automatic, Programmable. Controllable by foot pedal or by console
Irrigation
FLUID DELIVERY:
- Gravity fed. Eye pressure determined by the height of irrigation source
- Patented forced irrigation. Eye pressure determined by programmable air pressure (range 14-80 mmHg)
VALVING ELEMENT:
Solenoid driven pinch valve
CONTROL:
System footpedal
Aspiration
ASPIRATION PUMP TYPES:
Venturi and Peristaltic
ACTUATING MEDIUM:
Pressurized air from external source.
Pressure: from 500 to 800 KPa (72 to 116 PSI)
Flow:at least 30 Normal litre/minute @500mmHg.
DEFAULT VACUUM LEVEL:
User programmable
AVAILABLE VACUUM RANGE:
5 to 500 mmHg
DEFAULT FLOW RATE:
User programmable
FLOW RATE RANGE:
2 to 50cc/min (peristaltic only)
ASPIRATION RISE TIME:
Three levels, SLOW, MED, FAST
SURGEON MODE:
(Linear aspiration): Linear aspiration (Vacuum and/or flow rate) from zero to preset linearly controlled via system footswitch
SAFETY DEVICE:
ACS3 (Anterior Chamber Surge Suppression System)
CONTROL:
System footpedal
VIT (Vitrectomy)
HANDPIECE TYPE:
20/23/25 G pneumatically powered guillottine cutter (VIT)
CUTTING MODE:
Reciprocating motion
DEFAULT CUT RATE:
User programmable
CUTTING RATE:
From 60 up to 2500 cuts per minute (VIT)
SINGLE CUT:
Single cut mode available.
PORT SIZE:
Adjustable from 0.2 to 0.7mm
(reusable cutters only)
ACTUATING MEDIUM:
Pressurized air from external source.
OPERATING PRESSURE:
200 KPa (29.0 PSI)
SURGEON MODE:
(Linear cut): Linear cut rate from 0 to preset controlled via system footpedal
CONTROL:
System footpedal
DIATH (Diathermy)
TYPE:
Bipolar generator. Generator stops
when RF power is not needed.
OPERATING FREQUENCY:
2 MHz
NOMINAL POWER:
7W (450 Ohm LOAD)
NO LOAD MAX. VOLTAGE:
100 V
DEFAULT BIPOLAR POWER:
User programmable
BIPOLAR POWER:
5 to 100%
SURGEON MODE:
Allows linear control of the diathermy power
via system footswitch depression.
HANDPIECE TYPE:
(Linear Power): Bipolar microforceps, slim stat pencil eraser, intraocular diathermy pencils
CONTROL:
System footpedal
Phacoemulsifier
HANDPIECE TYPE:
Piezoelectric
FREQUENCY:
Approx. 40KHz
TIP STROKE:
From 0 to 100µm
POWER:
Panel or linear control of the U/S power
via system footswitch depression.
U/S MODE:
Linear or panel; Continuous, Short Pulse, Single Burst, Multi-Burst, Continuous Burst and Programmable Emission Mode
U/S TIMER:
From 0.00 minutes to 9.59 minutes – Equivalent Phaco Time display
CONTROL:
System footpedal
Technical specifications
INPUT VOLTAGE:
100/120/220/230-240 VOLT A.C. SELECT.
FREQUENCY:
50/60 Hz
INPUT AIR PRESSURE:
From 500 to 800 KPa (72 to 116 PSI)
Regulatory
CE MARKING:
European directive 93/42/EEC
SAFETY
Conforms to IEC 601-1
IEC 601-1-2
IEC 601-2-2
Pulsar
- VitModule - Technical specifications
Illumination
SOURCE:
5100°K HID Xenon lamp
LIGHT INTENSITY:
Adjustable in 4 steps by motorized diaphragm
FILTERS:
Green filter
Sterile Air Infusion
PRESSURE RANGE:
From 5 to 80 mmHg (steps of 5mmHg)
STERILITY:
Achieved by 0.22 microns sterile single use filter
SAFETY SYSTEMS:
Activation warning tone
Silicone Infusion
PRESSURE RANGE:
From 40 KPa (5,8 PSI) to 500 Kpa (72,5 PSI).
Step of 20 KPa (29 PSI)
CONTROLS:
Linear injection control
SAFETY SYSTEMS:
Activation warning tone
Scissors
MICROSCISSORS TYPE:
Semi-disposable pneumatically
powered - progressive cut
CUTTING RANGE:
From 60 to 320 cuts/min ~ single cut
ACTUATlNG SYSTEM:
Pressurized air
Electrical Specs
MAINS VOLTAGE:
100/120 V 50-60Hz 220/240 V 50Hz
Home
|
Company
|
Products
|
Accessories
|
Distributors
|
Articles
|
Jobs
|
Events
|
Contacts
|
Downloads
OPTIKON 2000 SpA - P.IVA 04678121007
- Base Module - Technical specifications- VitModule - Technical specifications
Pulsar
Programmability